Installing Support Software
1.Insert the support CD-ROM disc in the CD-ROM drive.
2.When you insert the CD-ROM disc in the system CD-ROM
drive, the CD automatically displays an Auto Setup screen.
3.The screen displays three buttons of
Setup
,
Browse CD
and
Exit
on the right side, and three others
Setup
,
Application
and
ReadMe
at the bottom. Please see the following illustration.
The
Setup
button runs the software auto-installing program as
explained in next section.
The
Browse CD
button is a standard Windows command that you
can check the contents of the disc with the Windows 98 file
browsing interface.
The
Exit
button closes the Auto Setup window. To run the
program again, reinsert the CD-ROM disc in the drive; or click the
CD-ROM driver from the Windows Explorer, and click the Setup
icon.
The
Application
button brings up a software menu. It shows the
bundled software that this mainboard supports.
The
ReadMe
brings you to the Install Path where you can find out
path names of software driver.
32
Summary of Contents for M950HLU
Page 4: ......
