PANEL2
If there are a headphone jack or/and a microphone jack on the front
panel, connect the cables to the PANEL2 on the mainboard.
Device Pins
Line Out (L)
9, 10
Empty 8
NC 7
Line Out (R)
5, 6
+5V Audio
4
VCCMIC 3
GND 2
MIC IN
1
M IC IN
(Pin 1)
2 1
Line Out(R)
(Pin 5)
10 9
Line Out(L)
(Pin 9)
GND
(Pin 2)
VCC M IC
(Pin 3)
+5V Audio
(Pin 4)
Line Out(R)
(Pin 6)
NC (Pin 7)
Empty
(Pin 8)
L ine Out(L)
(Pin 10)
Other Devices Installation
Floppy Diskette Drive Installation
The mainboard has a floppy diskette drive (FDD) interface and
ships with a diskette drive ribbon cable that supports one or two
floppy diskette drives. You can install a 5.25-inch drive and a 3.5-
inch drive with various capacities. The floppy diskette drive cable
has one type of connector for a 5.25-inch drive and another type of
connector for a 3.5-inch drive.
IDE Devices
Your mainboard has a primary and secondary IDE channel
interface (IDE1 and IDE2). An IDE ribbon cable supporting two
IDE devices is bundled with the mainboard.
If you want to install more than two IDE devices, get a second IDE
cable and you can add two more devices to the secondary IDE
channel.
IDE devices have jumpers or switches to set the IDE device as
MASTER or SLAVE. When installing two IDE devices on
one
cable, ensure that one device is set to MASTER and the other one
to SLAVE.
14
Summary of Contents for M950HLU
Page 4: ......
