IBM M768MR User Manual Download Page 1 | Manualshive

Page: 1 / 47

background image

Mainboard User’s Manual

This publication, including all photographs, illustrations and
software, is protected under international copyright laws, with all
rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without the express written
consent of the manufacturer.
The information in this document is subject to change without
notice. The manufacturer makes no representations or warranties
with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular
purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of the manufacturer to notify any person
of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium, Pentium-II, Pentium-III, MMX, and Celeron are
registered trademarks of Intel Corporation.
Microsoft, MS-DOS and Windows 95/98/NT are registered
trademarks of Microsoft Corporation.
Sound Blaster is a trademark of Creative Technology Ltd.
PC-cillin and ChipAwayVirus are trademarks of Trend Micro Inc.
AMI is a trademark of American Megatrends Inc.
A3D is a registered trademark of Aureal Inc.
Gamut is a registered trademark of Formosoft International Inc.
SuperVoice is a registered trademark of Pacific Image
Communications Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
Other names used in this publication may be trademarks and are
acknowledged.

Copyright © 2000

All Rights Reserved

M768MR, V3.2A

IBXX/September 2000

1
2
3
...
»

Summary of Contents for M768MR
















































Reviews:

No comments

Related manuals for M768MR

Brand: Xilinx Pages: 14

1stMainboard VG33

Brand: FIC Pages: 38

Brand: Portwell Pages: 7

B85 Anniversary

Brand: ASROCK Pages: 148

Brand: IEI Technology Pages: 15

Brand: JETWAY Pages: 49

ISL70219ASEHEV1Z

Brand: Intersil Pages: 10

Brand: CHAINTECH Pages: 59

Brand: BCM Pages: 93

Brand: Gigabyte Pages: 37

Brand: MSI Pages: 85

Brand: ASROCK Pages: 18

Brand: ON Semiconductor Pages: 7

Brand: TYAN Pages: 100

Brand: ASROCK Pages: 61

Memorator Pro 5xHS CB

Brand: Kvaser Pages: 16

Brand: TYAN Pages: 92

Brand: DFI Pages: 85

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands