Setup
3-9
3.2.6 Validating
10. Load a Blank Document
-
perform Loading a Blank
Document with the other side
of the document you have just
used in step 8 above.
11. Print the Settings
-
perform Printing the Current
Settings,
•
the changed parameter will be underlined; Font : HQD
3.2.7 Quitting
12. Load a Blank Document
-
perform Loading a Blank
Document using the same side
of the document you have just
used in step 11, above.
13. Button Bar
-
press and hold down until the
document is returned forward
and ejected.
3.3 Setup
Check
Prerequisite 1:
The Configuration Settings that your department will use.
Prerequisite 2:
The printer’s Current Settings. Note: Perform Printing the
Current Settings on page 2-3-8.
1. Compare prerequisite 1 with prerequisite 2
•
The Current Settings are the same as the Configuration Settings?
Yes
No
The Setup Check is
complete, Go to the
Operations Chapter.
Go to Changing a Setting on page 2-3-8
and make the required changes to the
Setup.