Network Connections
23
To restore all QLogic BIOS settings to their default values:
1.
Reboot the system and, when the QLogic board starts initializing during the boot process,
press
C
TRL
+Q
to enter the QLogic BIOS settings.
N
OTE
:
The QLogic board takes only a few seconds to initialize, so you should follow the boot
messages closely and be ready to press
C
TRL
+Q
as soon as you see the QLogic QLA board
referenced in the boot messages.
2.
Select Configuration Settings from the main menu of the QLogic BIOS settings.
3.
Select Restore Default Settings.
All settings are reset to their factory defaults.
Network Connections
Connect each Lustre workstation to your facility’s network to access background rendering
(render farm), the Lustre Station, and the facility’s NAS or SAN centralized storage (if
applicable).
Connect Port 1 on the Broadcom card of the Lustre workstation to your house network.
For Linux, connect your Incinerator workstation to your facility’s Incinerator private network.
For instructions on how to connect to the Incinerator private network, consult the
Autodesk
Incinerator 2008 Installation and User's Guide
.
Summary of Contents for IntelliStation Z Pro 6223
Page 16: ...Introduction 1 12...
Page 28: ...Connecting Peripherals 2 24...
