Hardware Configuration Guidelines
7
Verifying System BIOS Version and Settings
There are two models of the IBM Z Pro 6223. Model 64U was the first shipped for Incinerator
systems. This model was replaced by the 7DU when the Restriction of Hazardous Substances
(RoHS) European Union directive took effect.
•
The current certified system BIOS version for the 64U model is 1.52A.
•
The current certified system BIOS version for the 7DU model is 1.66A.
If the IBM workstation is using a different BIOS version, you must update it for this release.
Instructions for updating the BIOS on your IBM 6223 workstation are provided in articles
available on the IBM Web site.
For the 64U model, refer to:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-
56667
For the 7DU model, refer to:
http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/
docdisplay?lndocid=MIGR-57658&brandind=5000004
N
OTE
:
You do not normally need to adjust these settings. BIOS settings for the workstation are
provided here for informational purposes only.
To enter the system BIOS, you must press
F1
while booting the workstation.
The following table lists the proper Autodesk certified BIOS settings. Items not listed are set to
their default factory settings.
BIOS Menu
Item
Value
Devices and I/O ports
Parallel Port
Disabled
Serial ATA
Disabled
Startup Options, Startup
Sequence Options, Primary
Startup Sequence
First Startup Device
Removable
Second Startup Device
Hard Disk
Third Startup Device
CD/DVDROM
Fourth Startup Device
Disabled
Startup Options, Startup
Sequence
Wake on LAN
Off
Startup Options
Planar PXE/DHCP Priority
Normal
PCI Device Boot Priority
SLOT 1
Summary of Contents for IntelliStation Z Pro 6223
Page 16: ...Introduction 1 12...
Page 28: ...Connecting Peripherals 2 24...
