Notes:
1. Tape drives, CD-ROM, DVD/CD-RW, and DVD-ROM drives are examples of
removable-media drives. You can install removable-media drives in bay 2 only.
2. You have two serial ATA hard disk drive connectors on the system board. Each
serial ATA drive comes with a cable.
3. You can mix and match parallel IDE or serial ATA drives in bays 1 and 3.
4. The electromagnetic interference (EMI) integrity and cooling of the computer are
protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the bay
or the PCI adapter slot cover in the event you later remove the option.
5. For a complete list of supported options for your computer, go to
http://www.ibm.com/pc/; then, select your country and navigate to the list of
options for your computer.
Installing memory modules
The following notes describe the types of dual inline memory modules (DIMMs) that
your computer supports and other information that you must consider when
installing DIMMs.
Notes:
1. When you restart the computer after adding or removing a DIMM, the computer
displays a message that the memory configuration has changed.
2. Your IntelliStation M Pro Type 6220 computer uses industry-standard PC2700 or
PC3200 double-data-rate (DDR) dual inline memory modules (DIMMs).
3. The system board contains four DIMM connectors and supports two-way
memory interleaving.
4. The DIMM options available for your computer are 256 MB, 512 MB, and 1 GB
memory modules . Your computer supports a minimum of 256 MB and a
maximum of 4 GB of system memory.
5. The amount of usable memory will be reduced depending on the system
configuration. A certain amount of memory must be reserved for system
resources. The BIOS will display the total amount of installed memory and the
amount of configured memory.
6. Your computer comes with either one or two 256 MB, 512 MB, or 1 GB memory
DIMM installed. If your system has one DIMM installed, when you install an
additional DIMM, it must be installed in DIMM 3 memory connector, and must
be the same size, speed, type, and technology as the DIMM installed in DIMM 1
memory connector. You can mix compatible DIMMs from various manufacturers.
When one DIMM is installed in the system, the system runs as a single-channel
machine. When you add a DIMM in DIMM 3 memory connector, your system
defaults to a dual-channel machine.
7. DIMMs must be installed in matched pairs. The first pair of DIMMs you install in
DIMM 1 and DIMM 3 memory connectors must be the same size, speed, type,
and technology. You can mix compatible DIMMs from various manufactures. If
you install a second pair of DIMMs in DIMM 2 and DIMM 4 memory connectors,
they do not have to be the same size, speed, type, and technology as the
DIMMs installed in DIMM 1 and DIMM 3 memory connectors. However, the size,
speed, type, and technology of the DIMMs you install in DIMM 2 and DIMM 4
memory connectors must match each other.
8. Install only 2.5 V, 184-pin, double-data-rate (DDR) 333 or 400, PC2700 or
PC3200, unbuffered synchronous dynamic random-access memory (SDRAM)
with error correcting code (ECC) DIMMs. These DIMMs must be compatible
with the latest PC2700 or PC3200 SDRAM unbuffered DIMM specification. For
18
IBM IntelliStation M Pro Types 6220 and 6230: Installation Guide
Summary of Contents for IntelliStation M Pro
