IBM infoprint 1764 Page 27 User Manual Download

Page: 27 / 108

Printing from a USB flash memory device

Printing

Printing from a USB flash memory device

A USB Direct interface is located on the operator panel so you can insert a USB flash memory device and print PDF
documents and supported graphic files. Printing a document from a USB flash memory device is similar to printing a held
job.

Note: Supported graphic types are .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx.

Note the following when using a USB flash memory device with the printer USB Direct Interface:

•

USB devices must be compatible with the USB 2.0 standard.

•

Hi-Speed USB devices must support the Full-Speed standard as well. Devices only supporting USB low speed
capabilities are not supported.

•

USB devices must support the FAT file system. Devices formatted with NTFS or any other file system are not
supported.

•

You cannot print encrypted files or files without printing permissions.

To print from a USB flash memory device:

Make sure the printer is on and

Ready

Busy

appears.

Insert a USB flash memory device into the USB Direct interface.

Note:

•

If you insert the memory device when the printer requires attention such as when a paper jam
has occurred, the printer ignores the memory device.

•

If you insert the memory device when the printer is busy printing other jobs, the message

Printer Busy

appears. Select Continue, and your job prints after the other jobs finish.

Summary of Contents for infoprint 1764













































































































Search results

Summary of Contents for infoprint 1764

Reviews:

Related manuals for infoprint 1764

Brands by name

Popular brands

IBM infoprint 1764, User Manual

Search results

Summary of Contents for infoprint 1764

Reviews:

Related manuals for infoprint 1764

Brands by name

Popular brands