IBM infoprint 1764 Page 20 User Manual Download

Page: 20 / 108

Removing memory and option cards

Installing and removing options

Remove the screw that secures the card to the system board connector slot.

Gently pull the card out of the connector.

If you saved the metal plate that covers the connector slot and you do not plan to insert another card, attach the
plate.

Slide the clip side of the plate in first, making sure the clip end covers the groove on the system board.

Use the screw to secure the other end of the metal plate to the system board.

Place the card in its original packaging, or wrap the card in paper and store it in a box.

Replace the system board access cover. For more information, see Reinstalling the system board access
cover.

Summary of Contents for infoprint 1764













































































































Search results

Summary of Contents for infoprint 1764

Reviews:

Related manuals for infoprint 1764

Brands by name

Popular brands

IBM infoprint 1764, User Manual

Search results

Summary of Contents for infoprint 1764

Reviews:

Related manuals for infoprint 1764

Brands by name

Popular brands