IBM iLV300, User Manual

Page: 40 / 74

– NND prevents your notebook computer from going into Screen Save mode if
the USB cable is connected.
– Power Save automatically turns the lamp off after no signals are detected for
20 minutes. After an additional 10 minutes with no signal, the projector
powers down and can be toggled off. If an active signal is received before the
projector powers down, the image will be displayed. When
Power Save is
enabled, Screen Save is disabled.
– Screen Save automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns when
an active source is detected or a remote or keypad button is pressed.
Figure 5-15 shows the Screen Save menu.
v
Startup Logo : Enables you to display a blank screen instead of the default screen
at startup, and when no source is detected. Figure 5-16 shows the Startup Logo
menu.
v Blank Screen
: Determines what color is displayed when you press the Blank
button on the remote. Figure 5-17 shows the Blank Screen menu.
v
Effect Key : Enables you to assign a different function to the Effect button on the
remote by highlighting a function and pressing Select . Figure 5-18 on page 5-7
shows the Effect Key menu.
Figure 5-15. Screen Save menu
Figure 5-16. Startup Logo menu
Figure 5-17. Blank Screen menu
5-6
IBM iLV300 Value Data/Video Projector: User’s Guide