IBM ILC300, User Manual

Page: 31 / 62

either REC709 or REC601 for component video sources.
Color Temperature: Changes the intensity of the colors. Select a listed value, or
select User and individually adjust the intensity of the red, green, and blue colors.
Video Standard: When it is set to Auto, the projector attempts to pick the video
standard automatically based on the input signal it receives. (The video standard
options may vary depending on your region of the world.) If the projector is
unable to detect the correct standard, the colors may not look right or the image
may appear “torn.” If this happens, manually select a video standard by selecting
NTSC , PAL , or SECAM from the Video Standard menu.
Overscan: (video sources only) Removes noise around the video image.
The following four options are for computer sources only:
Phase: Adjusts the horizontal phase of a computer source.
Tracking:
Adjusts the horizontal phase of a computer source.
Horizontal/Vertical Position:
Adjusts the position of a computer source.
Chapter 5. Using the menus
21