IBM IC25N005ATDA04, Specifications

Page: 215 / 220

15.2 SET FEATURES Command Support Coverage
The following table provides a list of Feature Registers and Feature Names as well as a column titled
"Implementation for Travelstar 48GH, 30GN & 15GN" which indicates whether the drive has the capability
of executing the command in comparison to the ATA/ATAPI-5 defined command set. For details of
operation, refer to Section 13.29, "Set Features (EFh)" on page 163.
Reserved Reserved others
No Disable SERVICE interrupt EEh
No Disable release interrupt DDh
Yes Enable reverting to power on defaults CCh
Yes Set 4 bytes ECC BBh
Yes Enable read look-ahead feature AAh
No Enable Media Status Notification 95h
Yes Disable Address Offset mode 89h
Yes Disable Advanced Power Management 85h
Yes Disable write cache 82h
Yes Disable reverting to power on defaults 66h
No Enable SERVICE interrupt 5Eh
No Enable release interrupt 5Dh
Yes Disable read look-ahead feature 55h
Yes Set vendor specific bytes ECC 44h
Yes Enable Address Offset mode 09h
Yes Enable Advanced Power Management 05h
Yes Set transfer mode 03h
Yes Enable write cache 02h
Implementation
for Travelstar
48GH, 30GN & 15GN
Features
Name Features
Register
Figure 138. SET FEATURES command coverage
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
201