IBM IC25N005ATDA04, Specifications

Page: 152 / 220

13.13 Read Buffer (E4h)
see below Status 1 1 1 0 0 1 0 0 Command
- - - - - - - - Device/Head 1 - 1 D - - - - Device/Head
- - - - - - - - Cylinder High - - - - - - - - Cylinder High
- - - - - - - - Cylinder Low - - - - - - - - Cylinder Low
- - - - - - - - Sector Number - - - - - - - - Sector Number
- - - - - - - - Sector Count - - - - - - - - Sector Count
see below Error - - - - - - - - Feature
- - - - - - - - Data - - - - - - - - Data
7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0 Register
Command Block Input Registers Command Block Output Registers
V - 0 - - 0 V 0 0 0 V 0 0 0 0 0
ERR IDX COR DRQ DSC DF RDY BSY AMN T0N ABT 0 IDN 0 UNC CRC
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
Status Register Error Register
Figure 92. Read Buffer command (E4h)
The Read Buffer command transfers a sector of data from the sector buffer of the device to the host.
The sector is transferred through the Data Register 16 bits at a time.
The sector transferred will be from the same part of the buffer written to by the last Write Buffer command.
The contents of the sector may be different if any reads or writes have occurred since the Write Buffer
command was issued.
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
138