IBM IC25N005ATDA04, Specifications

Page: 163 / 220

13.19 Read Verify Sectors (40h/41h)
see below Status 0 0 1 0 0 0 0 R Command
- - - - H H H H Device/Head 1 L 1 D H H H H Device/Head
V V V V V V V V Cylinder High V V V V V V V V Cylinder High
V V V V V V V V Cylinder Low V V V V V V V V Cylinder Low
V V V V V V V V Sector Number V V V V V V V V Sector Number
V V V V V V V V Sector Count V V V V V V V V Sector Count
see below Error - - - - - - - - Feature
- - - - - - - - Data - - - - - - - - Data
7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0 Register
Command Block Input Registers Command Block Output Registers
V - 0 - V 0 V 0 V 0 V 0 V 0 V 0
ERR IDX COR DRQ DSC DF RDY BSY AMN T0N ABT 0 IDN 0 UNC CRC
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
Status Register Error Register
Figure 98. Read Verify Sectors command (40h/41h)
The Read Verify Sectors command verifies one or more sectors on the device. No data is transferred to
the host.
The difference between the Read Sectors command and Read Verify Sectors command is: data is
transferred to the host during a Read Sectors command; data is not transferred to the host during a Read
Verify Sectors command.
If an uncorrectable error occurs, the read verify will be terminated at the failing sector.
Output Parameters To The Device
Sector Count This is the number of continuous sectors to be verified. If zero is specified,
256 sectors will be verified.
Sector Number This is the sector number of the first sector to be transferred. (L = 0)
In LBA mode this register contains the LBA bits 0–7. (L = 1)
Cylinder High/Low This is the cylinder number of the first sector to be transferred. (L = 0)
In LBA mode this register contains the LBA bits 8–15 (Low) and bits
16–23 (High). (L = 1)
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
149