manualshive.com logo in svg

IBM IBM-3920, Installation And Operating Manual

Share
Download
IBM IBM-3920 Installation And Operating Manual Download Page 20

Caller ID Displays

When viewing a caller ID record, the name and number, time
and date of the call, and whether the call is New, Repeated,
or Priority are all displayed.

This display is shown when number only Caller ID service is
received.

"No Caller ID Available"

will be displayed when Caller ID

information is not available. This call was made from a
telephone company that does not offer Caller ID services
(including international calls).

"Blocked Call"

will be shown when a call is received from a

blocked number. For privacy reasons, some states allow
callers the option to prevent their telephone data from being
displayed on the other party's Caller ID display.

Display shows when the Caller ID information was received
incorrectly or only part of the data was received.

Note:

When an error is received, none of the data from this

call is saved in memory.

Display shows when a voice mail message has been received
and is stored by message waiting service provided by the
phone company.

This is shown when 

B

/

CID

is first pressed and between

the first and last call when viewing the Caller ID list.

This is displayed when 

B

/

CID

is pressed and there is no

Caller ID data stored. The phone will return to the idle screen
after 3 seconds.

 

No New Calls
00 Total Calls
            

 

02 New Calls
28 Total Calls
            Exit

Jan 01    Monday

USERNAME 12:28AM

Message Waiting
      MEM   CID

 

ERROR
 
      

 2:36AM  1/01

Blocked Call
 
      Opts  Exit

 2:36AM  1/01

No Caller ID
Available
      Opts  Exit

 2:36AM   1/01

        555-1212
 
Call  Opts  Exit

 2:36AM   1/01 N

    555-555-1212
      SMITH JOHN
Call  Opts  Exit

CALLER ID

37

Caller ID with Call Waiting Service

In order to use the "Call Waiting Caller ID" service you must subscribe to a
telephone company that offers Caller ID service combined with "call waiting"
service.

When a new call comes in while you are talking, you will hear a notification beep
from the handset and the volume is momentarily muted. The new caller's name
and phone number, if available, appears on the display.

1. When you receive a "call waiting" call and you want to

connect the call, press 

F

. The active call will be

placed on hold and the new call will be active.

2. Press 

F

to alternate between calls.

3. Press 

T

or place the handset back on the cradle to end the call.

Note:

If pressing 

F

does not work, it is possible you need to change your

flash time settings. See “Changing the Flash Time” on page 23 for more
information.

Storing Caller ID Records

1. Press 

B

/

CID

.

2. Use the 

 

to scroll to the call record you wish to

store.

3. Press 

B

/

Opts

. The display will show the CID

options menu.

4. To save the record, use the 

 

key to highlight “

Save

in PhoneBk

.”

5. Press 

T

/

OK

.

6. The display will show 

“Entry Stored...”

The number is

stored in the speed dial directory and after 3 seconds
the screen will return to the idle display.

7. To edit the entry, you must follow the instructions on

page 34, “Editing a Stored Number.”

38

CALLER ID

 2:36AM   1/01 N

       555-555-1212

      SMITH JOHN
Call  Opts  Exit

>Erase Call

 Save in PhoneBk

 Erase All Calls
OK          Exit

Talk

1

2

3

ABC

DEF

4

5

6

GHI

JKL

MNO

7

8

9

PQRS

TUV

Flash

Redial

Monitor

WXYZ

*

0

#

Mute

Jan 01    Monday

USERNAME 12:28AM

      MEM   CID

Summary of Contents for IBM-3920




























Reviews:

No comments

Brands by name

Popular brands

Load more brands