LOCATION OF CONTROLS AND FEATURES
7
Talk
P
The TALK key is used to access the telephone line.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Flash Key
G
The
G
key is used to access telephone company services, like call waiting.
Redial Key
F
The telephone will automatically redial the last number dialed.
F
is also used to program a
pause of 3.6 seconds into a dialing sequence stored into a memory location.
Volume Up/Down Keys
L M
The
L M
keys adjust the handset volume.
Memory Key
E
The
E
is used to program and retrieve the numbers in the speed dial directory.
Channel Change Key
O
The
O
key, when pressed, will scan up to 50 channels and select the clearest one to provide
the best possible reception.
Temporary Tone Key
*
If the base is set to pulse dialing, pressing
*
causes subsequent digits to be dialed out
using tone until the line is put back on hook.
Ringer Switch
The
ringer
switch is used to turn the handset ringer
ON
and
OFF
.
Headset Jack
Allows using a headset for hands-free convenience.
Using the Handset Finder (PAGE)
1.
Press
N
on the base, and if the handset is within range, the handset will beep for 20
seconds.
2.
Press any key on the handset to stop the page find feature.
Out-of-Range Warning
If you venture too far from the base, the handset will beep a warning tone. Reverse your
direction to re-establish connection with the base or the call will be dropped. When the base
detects that the handset has been out of range for 15 continuous seconds it will release the
telephone line.
Temporary Tone Dialing
If you are in an area that has rotary (PULSE) dialing service, you can temporarily switch to
tone dialing be pressing the
*
key. Tone dialing will last for the duration of the call and will
revert back to rotary when the handset is turned off.
18
OTHER FEATURES
Summary of Contents for IBM-3415
Page 23: ...22 NOTES ...
