IBM IBM-3415, Installation And Operating Manual

Page: 10 / 24

Making Calls
1. Pick up the handset from the base.
2. Press
P
. The LED on the handset will flash while
the handset is scanning for a clear channel. The
LED will glow steadily when the connection is
made. Wait until you hear a dial tone.
3. Dial the number you wish to dial.
4. When you are finished talking, press the
P
key or
place the unit back into the base to end the call.
Note: The “ CHARGE/IN USE ” light on the base will
turn green when the line is active.
Receiving Calls
When you hear the phone ring:
1.
If the handset is in the base, lift the handset from
the base. The handset will turn on. There is no
need to push the
P
key if the unit is in the base
when the call comes in.
2. If the handset is off the base, push
P
.
3. When you are finished, push
P
or place the
handset back in the base.
Redialing
1. Press
P
, once the IBM-3415 has acquired a line,
press
F
to redial the number last dialed.
To Receive a Call Waiting Call
• Press
G
to go to the new caller
• Press
G
again to go back to the original caller
16
BASIC OPERATION
1 2 3
4 5 6
7 8 9
0 #
OPER
WXYZ TUV PQRS
MNO JKL GHI
DEF ABC
IN USE
VOLUME
REDIAL FLASH
TONE
Flash
Talk Key
Redial Key
Data Jack
Used for connecting to a computer or fax machine.
Tone/Pulse Switch
Used to set the dialing method for tone or pulse dialing.
LOCATION OF CONTROLS AND FEATURES
Telephone
Line Jack
DC-9V
Jack Tone Pulse
Switch
Data Jack
Right Side View
Rear View
9
Use only with class 2
Power Source 300mA
P/T DC-9V TEL LINE