month. (You can verify the last power up date by selecting Logs in the GUI and verifying the date of the
last entries.)
About this task
To log in to the command line interface and format the uninitialized flashcards, complete the following
steps:
Procedure
1.
From a telnet or Secure Shell (SSH) client, access the system by using the system IP address.
2.
Log in using the default administrator username
admin
and the default password
password
, or your
system's unique username and password.
3.
At the command prompt, enter
#diag
to enter diagnostic mode.
4.
To confirm the command, enter
YES
.
5.
From the diagnostic menu, type
1
.
6.
To confirm the command, enter
YES
.
7.
From the Format Flashcard submenu, either enter
ALL
to format all flashcards, or select an individual
flashcard by typing
flashcard-
#
where
#
is the slot number of the new flashcard.
8.
Enter
q
to exit diagnostic mode and return to the command prompt.
9.
Enter
#storage
to confirm that all the flashcards are formatted.
14
IBM FlashSystem: Installing the IBM FlashSystem 810
Summary of Contents for FlashSystem 810
