IBM FlashSystem 5000 Series Quick Installation Manual Download

Page: 22 / 106

Table 6. System communications types (continued)
Communications

type

Host to system node

System node to storage system

iSCSI (10 Gbps

Ethernet)

Yes
• FlashSystem 5010 systems must have an

optional 4-port 10 Gbps Ethernet host

interface adapter installed.

• FlashSystem 5030 systems have two onboard

10 Gbps Ethernet ports that can be used for

host attachment.
The optional 4-port 10 Gbps Ethernet host

interface adapter can also be installed.

Not supported

iSCSI (25 Gbps

Ethernet)

Yes, using an optional 2-port 25 Gbps host

interface adapter

Not supported

Serial-attached

SCSI (SAS)

Yes, using an optional 4-port 12 Gbps SAS host

interface adapter.

The system supports a one-time

migration of external storage data to

the system. In the management GUI,

select Pools > Storage Migration >

New Migration to start the storage

migration wizard.

4 IBM FlashSystem 5000 : FlashSystem 5000 Quick Installation Guide

Summary of Contents for FlashSystem 5000 Series











































































































Search results

Summary of Contents for FlashSystem 5000 Series

Reviews:

Related manuals for FlashSystem 5000 Series

Brands by name

Popular brands

IBM FlashSystem 5000 Series, Quick Installation Manual

Search results

Summary of Contents for FlashSystem 5000 Series

Reviews:

Related manuals for FlashSystem 5000 Series

Brands by name

Popular brands