IBM F50 RS/6000 7025, User Manual, Page: 38 / 364

Using the CD–ROM Drive
CAUTION:
A Class 3 laser is contained in the device. Do not attempt to operate the device
while it is disassembled. Do not attempt to open the covers of the device, as it
is not serviceable and is to be replaced as a unit.
The CD–ROM is located in bay A1 of the system unit, see page 2-15. Your
CD–ROM drive looks like the one shown in the illustration, and the controls are
located as indicated.
When the CD–ROM is set to On, the status light indicates one of several conditions.
The following are status light states and the respective conditions of the CD–ROM
drive:
Ÿ
Off during standby with the tray loaded or unloaded.
Ÿ
Blinks from insertion of the tray to completion of initialization.
Ÿ
Blinks slowly when disc is dusty.
Ÿ
Blinks fast when in the audio mode.
Ÿ
Lights during data transfer operations.
Ÿ
Lights steady when:
– No disc is in the tray.
– The disc is in the tray upside down.
– Some condition exists that should be checked. If this occurs, contact your
service representative.
2-12
IBM RS/6000 7025 F50 Series User's Guide