IBM ESS 5000 SC Series Hardware Manual Download

Page: 56 / 78

Do not modify any other entries than

IPADDR

and

NETMASK

Ensure that the file has the following information. Use the supplied management IP address from the

customer.

DEVICE=enP1p8s0f0

IPADDR=192.168.45.20

NETMASK=255.255.255.0

BOOTPROTO=static

ONBOOT=yes

TYPE=Ethernet

NAME=enP1p8s0f0

Note: If the MAC address is already entered, do not remove it.

3. To save the file, press ESC, run

:wq

command, and then press Enter.

4. To reload the connections, run the

nmcli c reload

command, and then press Enter.

5. To see the IP address set to the specified interface, run the

ip addr

command, and then press

Enter.

You can now do a ping test on the command line or run the

essutils

tool to perform the task. You can

turn off the Wi-Fi that is connected to the laptop, if the ping test is not successful.

44 IBM Elastic Storage System 5000: Hardware Guide

Summary of Contents for ESS 5000 SC Series















































































Search results

Summary of Contents for ESS 5000 SC Series

Reviews:

Related manuals for ESS 5000 SC Series

Brands by name

Popular brands

IBM ESS 5000 SC Series, Hardware Manual

Search results

Summary of Contents for ESS 5000 SC Series

Reviews:

Related manuals for ESS 5000 SC Series

Brands by name

Popular brands