manualshive.com logo in svg

IBM ESS 5000 SC Series, Hardware Manual

Share
Download
IBM ESS 5000 SC Series Hardware Manual Download Page 46

If the output summary that appears at the end of the screen displays 

ERROR

, see either the IBM

Elastic Storage System 5000: Problem Determination Guide or the WCII or both to debug the issue.
Note: Incorrect adapters or disk placement is usually the issue. Unsupported hardware or missing

paths to some disks could also cause an error.

10. Press Enter to continue.
11. Highlight the Check enclosure cabling and paths to disks option and then press Enter.

If the output summary that appears at the end of the screen displays 

ERROR

, see either the IBM

Elastic Storage System 5000: Problem Determination Guide or the WCII or both to debug the issue.
Note: Incorrect enclosure cabling, bad disks, or the enclosures in a bad state and should be power

cycled can cause an error.

12. Press Enter to continue.
13. Highlight the Check disks for IO operations option and then press Enter.

A message stating the risks appears.

34  IBM Elastic Storage System 5000: Hardware Guide

Summary of Contents for ESS 5000 SC Series















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands