Chapter 3. Frequently asked questions
25
SMP Expansion Modules
For additional information, see “SMP Expansion Modules” on page 13.
Should the shipping/retention bracket for the SMP Expansion Module be
removed after shipment?
The shipping/retention bracket installed between the chassis and the Upper and
Lower SMP Expansion Modules (if upper is installed) is required for correct system
operation.
Attention: If you remove this bracket, you must replace it.
If a shipping/retention bracket is not available, order FRU part number 24P1283.
What is the correct removal/replacement procedure for an SMP
Expansion Module?
See “Removing an SMP Expansion Module” on page 14 and “Installing an SMP
Expansion Module” on page 15 for detailed instructions.
