IBM Eserver xSeries 360 Type 8686, Installation Manual

Page: 26 / 74

16
IBM xSeries 360 Type 8686:Installation Guide
Complete the following steps to install a microprocessor:
1. Review the safety precautions beginning on page v and “Handling static-sensitive
devices” on page 3.
2. Turn off the server, disconnect all power cords and external cables, and remove
the top cover (see “Removing the server top cover and bezel” on page 7).
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, see “Handling static-sensitive devices” on page 3.
3. Lift off the microprocessor heat sink stabilizer as shown in the following illustration
and determine the socket where the microprocessor is to be installed.
Microprocessor
connector 1 (U11)
Microprocessor
connector 2 (U23)
Microprocessor
connector 3 (U12)
Microprocessor
connector 4 (U22)
Microprocessor 4
VRM connector
(J29)
Microprocessor 2
VRM connector
(J30)
Microprocessor 1
VRM connector
(J2)
Microprocessor 3
VRM connector
(J3)