IBM eServer 232 xSeries, User Reference Manual

Page: 127 / 174

Chapter 6. Solving Problems
113
415 Analog/digital
modem Not
applicable No modem was detected 1. Verify that the modem is
properly attached to the
server.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
PCI modem detected but not enabled 1. Change the configuration to
enable the modem.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
Failed Modem reset failed Replace the modem.
If the problem persists, call for
service.
No dialtone detected 1. Make sure that the phone
line attached to the modem
has a dial tone. (Connect a
phone to the line and listen,
if necessary.) If there is no
tone, have the phone line
serviced.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
Code Function Result Text message Action
Table 14. Diagnostic error messages.