IBM E02HRLL-G - WebSphere Partner Gateway Express, Administration Manual

Page: 93 / 268

3. From the Queue Documents Search window, specify the search criteria (see
Table 12).
Table 12. Queue Documents Search window
Criteria Description
Partner Name To complete this field you can:
1. Specify the Partner name in the field.
2. Specify part of the partner name in this field and click Show
Partners . Select the partner from the list.
3. Specify the wildcard * and click Show Partners . Select the
partner from the partner list.
Note:
Clicking
Show Partners
displays a Partner field on the page.
The Partner field lists all the available partners in alphabetical
order.
Destination The first item in this list is
All
, which is selected by default. The
rest of the list is an ordered list of destination transports. On this
list, you can select only a single destination. The default is
All
.
Note: The Destination list is automatically populated with the
selected partner’s destinations and the list is presented in
alphabetical list.
Sort By Select whether the list should be sorted by Partners (the default), by
Destinations, Reference ID, or Queued timestamp (the time the
document was last sent).
Reference ID Type the unique identification number assigned to the document by
the system.
Direction Click Ascend to display documents starting with the oldest time
stamp or beginning of the alphabet, or Descend to display
documents starting with the most recent time stamp or end of the
alphabet.
Document ID Type the unique identification number assigned to the document by
the source partner.
Results Per Page Specifies the number of documents displayed on a page.
Maximum Documents
Allowed Specifies the number of records to be displayed.
4. Click Search . The results of the queues search are displayed.
Stopping the processing of documents from the destination queue
About this task
Using the Destination Queue, you can make a request to WebSphere Partner
Gateway to stop processing the document. When you click
Stop process
icon, your
request to stop processing the document is submitted and the status of the
document is shown as Stop Submitted. This status means that the request to stop
processing the document has been submitted.
The following procedure describes how to stop processing the documents.
1. Click Viewers > Destination Queue .
2. From the Destination Queue window, click Documents Search .
3. Complete the parameters in the window (see Table 12).
4. Click Search . The results of the queues search are displayed.
5.
Click the
Stop process
icon to stop the processing of the document.
Chapter 9. Managing the Destination Queue
87