IBM E02HRLL-G - WebSphere Partner Gateway Express Administration Manual Download Page 105

Page: 105 / 268

FTP Reports

FTP Reports provides details on FTP Statistics and FTP Connections.

FTP Statistics

About this task

The FTP Statistics page will display the FTP Server Status in Read Only Mode.

Note:

The statistics will not be displayed if the FTP Server or the FTP

Management Server is not available.

To view the FTP server status, do the following:

Click

Tools > FTP Reports

. The FTP Statistics page gets displayed.

The following server status information is displayed:

Table 22. FTP Statistics

Value

Description

Server start time

Start time of the FTP Server.

Number of directories
created

Number of directories created by users using mkdir.

Number of directories
removed

Number of directories removed by users using rmdir.

Number of file uploaded Number of files uploaded by all users.
Number of files
downloaded

Number of files downloaded by all users.

Number of files deleted

Number of files deleted by all users using delete command.

Uploaded Bytes

Total number of bytes uploaded.

Downloaded Bytes

Total number of bytes downloaded.

Current logins

Displays existing logins.

Total Logins

Total logins since the last reset.

Total failed logins

Total number of logins failed.

Current Connections

Current connections since the last reset.

Total Connections

Total connections since the last reset.

Click

Reload

to refresh current logins.

Click

Reset

to reset the values.

FTP Connections

About this task

View FTP Connections by following the steps mentioned below:

Click

Tools > FTP Reports > FTP Connections.

The following connection information is displayed in the report:

Table 23. FTP Connections

Value

Description

The login userid for this connection. If this is blank, it means that
the user has only established a connection but has not logged in.

The time when the user logged in. If this is blank, it means that
the user has only established a connection.

Chapter 10. Analyzing document flows

Summary of Contents for E02HRLL-G - WebSphere Partner Gateway Express













































































































































































































































































Search results

Summary of Contents for E02HRLL-G - WebSphere Partner Gateway Express

Reviews:

Related manuals for E02HRLL-G - WebSphere Partner Gateway Express

Brands by name

Popular brands

IBM E02HRLL-G - WebSphere Partner Gateway Express, Administration Manual

Search results

Summary of Contents for E02HRLL-G - WebSphere Partner Gateway Express

Reviews:

Related manuals for E02HRLL-G - WebSphere Partner Gateway Express

Brands by name

Popular brands