IBM DJSA-210 - Travelstar 10 GB Hard Drive, Specifications

Page: 178 / 211

13.32.2 Device Attributes Data Structure
The following defines the 512 bytes that make up the Attribute Value information. This data structure is
accessed by the host in its entirety using the S.M.A.R.T. Read Attribute Values subcommand. All multibyte
fields shown in these data structures follow the ATA/ATAPI-5 specification for byte ordering, namely that
the least significant byte occupies the lowest numbered byte address location in the field.
512
(*2) (*1) 1FFh 1 Data structure checksum
00h 182h 125 Vendor specific
00h 176h 12 Reserved
(*2) (*1) 175h 1 Extended self–test completion time in minutes
(*2) (*1) 174h 1 Short self–test completion time in minutes
(*2) (*1) 173h 1 Self–test failure check point
01h (*1) 172h 1 S.M.A.R.T. device error logging capability
0003h (*1) 170h 2 S.M.A.R.T. capability
1Bh (*1) 16Fh 1 Off–line data collection capability
(*2) (*1) 16Eh 1 Current segment pointer
(*2) (*1) 16Ch 2
Total time in seconds to complete off–line
data collection activity
(*2) (*1) 16Bh 1 Self–test execution status
(*2) (*1) 16Ah 1 Off–line data collection status
(*2) (*1) 15Eh 12 30th Device Attribute
↕ ↕ ↕ ↕ ↕
(*2) (*1) 1Ah 12 3nd Device Attribute
(*2) (*1) 0Eh 12 2nd Device Attribute
(*2) (*1) 02h 12 1st Device Attribute
0010h binary 00h 2 Data Structure Revision Number
Value Format Offset Byte Description
(*1)
–
See paragraphs 13.32.2.1, 13.32.2.12, 13.32.2.2, 13.32.2.2,
and13.32.2.2 for definitions of titles in the Description column.
(*2)
–
This value varied due to actual operating condition.
Figure 111. Device Attribute Data Structure
13.32.2.1 Data Structure Revision Number
The Data Structure Revision Number identifies which version of this data structure is implemented by the
device. This revision number will be set to 0005h. This revision number identifies both the Attribute Value
and Attribute Threshold Data structures.
Travelstar 32GH/30GT/20GN hard disk drive specifications
164