IBM DJSA-210 - Travelstar 10 GB Hard Drive, Specifications

Page: 126 / 211

H This indicates the head number of the track to be formatted. (L = 0)
In LBA mode this register specifies that LBA address bits 24–27 are to be
formatted. (L = 1)
Input Parameters From The Device
Sector Number In LBA mode this register specifies the current LBA address bits as 0–7 (L = 1).
Cylinder High/Low In LBA mode this register specifies the current LBA address bits as 8–15 (Low)
and bits 16–23 (High).
H In LBA mode this register specifies the current LBA address bits as 24–27 (L = 1).
Error This indicates the Error Register. An Abort error (ABT = 1) will be returned under
the following conditions:
!
The descriptor value does not match the certain value (except 00h).
In LBA mode this command formats a single logical track including the specified
LBA.
Explanation for descriptor
Descriptor : 00h This indicates the sector of data will be initialized to 00h.
remainder of buffer filled with 00h
00h
00h
:
:
00h
00h
N*2+2
N*2+3
:
:
510
511
descriptor value for sector number N
sector number (last sector for the track)
xxh
N
N*2
N*2+1
:
:
:
:
descriptor value for sector number 02h
sector number
xxh
02h
4
5
descriptor value for sector number 01h
sector number
xxh
01h
2
3
descriptor value for sector number 00h
sector number
xxh
00h
0
1
Description Data Byte
Descriptor : 00h—Format sector as good sector
Figure 76. Format track data field format
Travelstar 32GH/30GT/20GN hard disk drive specifications
112