manualshive.com logo in svg

IBM Deskstar 40GV, Installation And Reference Manual

Share
Download
IBM Deskstar 40GV Installation And Reference Manual Download Page 60

56 

Translation 
Translation is the process of redefining the physical parameters of a hard disk drive to 
parameters compatible with the BIOS and operating system of a computer. 
 
Ultra ATA  
Ultra ATA (also known as Ultra DMA) is a data transfer protocol for transferring data to and from 
main memory without passing it through the processor.   Ultra ATA differs from traditional DMA by 
using a strobe signal to latch data at twice the data rate.  Ultra ATA improves speed and 
efficiency by allowing the processor to perform other operations while data is retrieved from the 
drive.  
 
UNIX 
UNIX is an operating system developed for multitasking in a multi-user environment.  The UNIX 
operating system was originally developed for use on minicomputers but has been adapted for 
mainframes, microcomputers, and PCs. 
 
Windows NT 
Windows NT is Microsoft’s 32-bit New Technology operating system.  Windows NT 3.5 and 4.0 
support FAT16 and NTFS  (New Technology File System).   Windows NT 4.0 does not support 
FAT32. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Deskstar 40GV



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands