IBM Deskstar 120 GXP, Specifications

Page: 117 / 211

11.0 Command descriptions
1 1 0 0 0 1 1 0 C6 Set Multiple Mode 3
1 1 1 1 1 0 0 1 F9 Set Max Address 3
1 1 1 0 1 1 1 1 EF Set Features 3
1 0 1 0 0 0 1 0 A2 Service 5
0 1 1 1 - - - - 7x Seek 3
1 1 1 1 0 0 1 0 F2 Security Unlock 2
1 1 1 1 0 0 0 1 F1 Security Set Password 2
1 1 1 1 0 1 0 1 F5 Security Freeze Lock 3
1 1 1 1 0 1 0 0 F4 Security Erase Unit 2
1 1 1 1 0 0 1 1 F3 Security Erase Prepare 3
1 1 1 1 1 0 1 0 F6 Security Disable Password 2
0 0 0 1 - - - - 1x Recalibrate 3
0 1 0 0 0 0 0 1 41 Read Verify Sectors 3
0 1 0 0 0 0 0 0 40 Read Verify Sectors 3
0 0 1 0 0 0 0 1 21 Read Sectors 1
0 0 1 0 0 0 0 0 20 Read Sectors 1
1 1 1 1 1 0 0 0 F8 Read Native Max Address 3
1 1 0 0 0 1 0 0 C4 Read Multiple 1
0 0 1 0 0 0 1 1 23 Read Long 1
0 0 1 0 0 0 1 0 22 Read Long 1
1 1 0 0 0 1 1 1 C7 Read DMA Queued 5
1 1 0 0 1 0 0 1 C9 Read DMA 4
1 1 0 0 1 0 0 0 C8 Read DMA 4
1 1 1 0 0 1 0 0 E4 Read Buffer 1
0 0 0 0 0 0 0 0 00 NOP 3
1 0 0 1 0 0 0 1 91 Initialize Device Parameters 3
1 0 0 1 0 1 0 1 95 Idle Immediate* 3
1 1 1 0 0 0 0 1 E1 Idle Immediate 3
1 0 0 1 0 1 1 1 97 Idle* 3
1 1 1 0 0 0 1 1 E3 Idle 3
1 1 1 0 1 1 0 0 EC Identify Device 1
0 1 0 1 0 0 0 0 50 Format Track 2
1 1 1 0 0 1 1 1 E7 Flush Cache 3
1 0 0 1 0 0 0 0 90 Execute Device Diagnostic 3
1 0 0 1 1 0 0 1 B1 Device Configuration Set 2
1 0 0 1 1 0 0 1 B1 Device Configuration Identity 1
1 0 0 1 1 0 0 1 B1 Device Configuration Freeze Lock 3
1 0 0 1 1 0 0 1 B1 Device Configuration Restore 3
1 0 0 1 1 0 0 0 98 Check Power Mode* 3
1 1 1 0 0 1 0 1 E5 Check Power Mode 3
Binary Code Bit
7 6 5 4 3 2 1 0
Code
(Hex)
Command
Pro-
tocol
Commands marked * are alternate command codes for the previously defined command.
Figure 87. Command set (1 of 2)
See next page for list of Protocol definitions.
Deskstar 120GXP hard disk drive specifications
103