IBM Deskstar 120 GXP, Specifications

Page: 199 / 211

Input parameters from the device on bus release
Sector Count Bits 7 - 3 (Tag) contain the Tag of the command being bus released.
Bit 2 (REL) is set to one.
Bit 1 (I/O) is cleared to zero.
Bit 0 (C/D) is cleared to zero.
Sector Number, Cylinder High/Low, H n/a.
SRV Cleared to zero when the device performs a bus release. This bit is set to 1 when
the device is ready to transfer data.
Input parameters from the device on Command Complete
Sector Count Bits 7 - 3 (Tag) contain the Tag of the completed command.
Bit 2 (REL) is cleared to 0.
Bit 1 (I/O) is set to one.
Bit 0 (C/D) is set to one.
Sector Number, Cylinder High/Low, H
Sector address of unrecoverable error (applicable only when an unrecoverable
error has occurred.)
SRV Cleared to 0.
Deskstar 120GXP hard disk drive specifications
185