IBM Classic Series, Homeowner'S Manual

Page: 25 / 37

14
Home Network Connection Center
Other modules
Camera Module
This module is available only with Home Network Connection Centers that have
either an 8 TAP A/B or 16 TAP video distribution amplifier installed. The Camera
Module displays the Home Network Connection Center video monitoring
cameras mounted throughout your home. The module can support up to four
cameras and has the following features:
1 Input Ports – Each port receives a modulated signal from an individual camera.
2 LED Signal Indicator – This indicator allows you to quickly check camera status. A
green LED light indicates an active and trouble-free camera. An unlit LED light
indicates either that there is no camera assigned to that port or that the camera
is inactive.
3 Output Port – This port sends camera signals to the video distribution amplifier
module for distribution throughout your home. Camera signals can be received
at all external TV connections on the network.
4 Power Input – 15 volt DC power is connected to this port.
5 Power LED - The LED lights up when power is being supplied to the module.
Computer Networking Module
The Computer Networking Module connects up to four computer taps located
throughout your home to a network. To utilize the computer networking module,
each computer to be connected to your home network requires a 10BASE-T
Ethernet network interface card (available either from your Home Systems
Integrator or from computer supply stores) and networking software (refer to
your operating system manual for configuring your computers for network use).
The module has the following features:
3
4
5
1
2
Warning!
Do not terminate or cap unused
camera input connections. Doing so
may cause damage to the module.
Avertissement!
Ne mettez pas fin aux connexions
d’entrée de la caméra non utilisées,
et ne les obstruez pas. Cela pourrait
causer des dommages au module.