IBM BladeCenter QS20, Installation And User Manual

Page: 44 / 92

Table 3. InfiniBand package contents (continued)
D escription What the item loo k s li k e
1 x blade be z el
4 x screws
1 x gasket
What you need to install In f ini B and
Make sure you have a small flat screwdriver before you install your InfiniBand card.
Installin g In f ini B and
To install an InfiniBand option, do the following:
1 . Shut down the BladeCenter QS20.
2. Remove the BladeCenter QS20 from BladeCenter.
3 . O pen the top cover.
4. Unlatch the front be z el and partially remove it from the metal guides.
5 . Unplug the control panel and serial cable connectors from the blade ’ s board as
shown in Figure 1 2 on page 31 .
30
BladeCenter QS20 Type 0200: Installation and User ’ s Guide