IBM B50, User Manual

Page: 77 / 221

MultiBoot Menu
The options available from this screen allow you to view and set various options
regarding the operating system and boot sequence.
à ð
Multiboot Menu
1. Select Software
2. Software Default
3. Select Install Device
4. Select Boot Devices
5. OK Prompt
6. Multiboot Startup
.------.
|X=Exit|
------'
===>
á ñ
Select Software: If this option is supported by the operating system, this option
shows the names of the operating system installed. This option may not be
supported by all operating systems.
If you are running on AIX and you receive the following:
No Operating System Installed
This would mean that information in nonvolatile storage could have been lost, as
would happen if the battery had been removed. To re-create this value, run the
bootlist command under AIX with the appropriate parameter. See the bootlist
command in your AIX documentation.
Software Default: If this option is supported by the operating system, you can
select the default operating system to start the system. This option may not be
supported by all operating systems.
Select Install Device: Produces a list of devices, for example the CD-ROM, from
which the operating system is installed. Select a device, and the system searches
the device for an operating system to install and if supported by the operating system
in that device, the name of the operating system displays.
Chapter 3. Using System Management Services
3-25