IBM B50 User Manual Download

Page: 111 / 221

8. Reinstall any adapters you removed into their original connectors. (If you need

further information for installing adapters, see “Installing Adapters” on
page 4-23).

9. Go to “Device Records” on page A-2 and update the server memory information.

Return here to continue.

What to do next?

To enable or disable:

The privileged-access password, go to page 4-11.

The automatic power-up feature, go to page 4-13.

The power-on password, go to page 4-8.

The external SCSI connector, go to page 4-33.

To install:

A memory module, go to page 4-16.

An adapter, go to page 4-23.

An internal drive, go to page 4-29.

A new battery, go to page 4-36.

To remove:

An adapter, go to page 4-26.

A memory module, go to page 4-20.

An internal drive, go to page 4-29.

To complete the installation, go to page 4-39.

Chapter 4. Installing and Removing Options

4-19

Summary of Contents for B50






























































































































































































































Search results

Summary of Contents for B50

Reviews:

Related manuals for B50

Brands by name

Popular brands

IBM B50, User Manual

Search results

Summary of Contents for B50

Reviews:

Related manuals for B50

Brands by name

Popular brands