IBM ARTIC X.25, Manual To Operations

Page: 56 / 70

9 and 10 System Unit Address to call an adapter reset. Use the
values shown: 0Fh, E010h. (Not supported on the PCI
co-processor adapter.)
11 End-Record Delimiter. Value ';' or '$'. If this is the last
adapter in the ICAPARM file, set to '$'; otherwise, set to ';'.
Example 2 — for Multiple Co-Processor Adapters
The following example shows an ICAPARM.PRM file for 2 ISA and 2
PCI co-processor adapters in an ISA/PCI system:
# ððð1 ðð ðð 1ð 1ð 1ð 32 ðF Eð1ð ;
# ð6Að ðð 6F 2ð 2ð 2ð 2ð ðC Eð1ð ;
# ðððð ðð ðð 1ð 1ð 5ð 32 ðF Eð1ð ;
# ð2Að ðð 6E 1ð 1ð 5ð 32 ðC Eð1ð $
Field Number 1 2 3 4 5 6 7 8 9 1ð 11
In this example, the second physical PCI adapter has been assigned
logical card 0, and the first physical PCI adapter has been assigned
logical card 2. The other two adapters have been interspersed in
logical card order.
Note: For an explanation of the fields, see the field descriptions
under “Example 1 — for One Co-Processor Adapter” on
page A-3.
A-4
X.25 Co-Processor PCI GTO