IBM ARTIC X.25, Manual To Operations

Page: 37 / 70

à ð
IBM REALTIME INTERFACE CO-PROCESSOR
AND X.25 INTERFACE CO-PROCESSOR
_____________________________________________________
| | | | | | |
PRESENT | | STG | PWR | L | B | PORTS |
____ | CARD | SIZE | ON | V | U | __________|
CARD| | ADDR | KB | ERR | L | S | | ADAPTER |
____|___|______|______|______|____|___|___|__________|
| | | | | | | | | |
| ð | Y | ð2Að | 512 | | 1ð |32 | 1 | V24/V35 |
| | | | | | | | | X21 |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|____|___|______|______|______|____|___|___|__________|
ARE ALL REALTIME INTERFACE
CO-PROCESSORS RECOGNIZED
(Y/N)?
CHECK THE REALTIME INTERFACE
CO-PROCESSOR CONFIGURATION
-> PRESS ENTER
á ñ
DOES THE CONFIGURATION INFORMATION IN EACH COLUMN
MATCH THE SETTINGS IN YOUR CONFIGURATION?
NO Continue to the next page.
YES Press Enter and continue to page 4-10 to perform a complete
diagnostic checkout.
If an error is displayed in the PWR ON ERR column, replace the
co-processor adapter that caused the failure and rerun the PCI
co-processor adapter diagnostics (page 4-4).
Otherwise, check the settings of the switches on the adapters, as
explained in Chapter 3, “Connector Information.”
If the switches are wrong, correct them and repeat the PCI
co-processor adapter diagnostics.
Problem Determination Procedures
4-9