IBM ARTIC X.25, Manual To Operations

Page: 44 / 70

à ð
IBM REALTIME INTERFACE CO-PROCESSOR
AND X.25 INTERFACE CO-PROCESSOR
_____________________________________________________
| | | | | | |
PRESENT | | STG | PWR | L | B | PORTS |
____ | CARD | SIZE | ON | V | U | __________|
CARD| | ADDR | KB | ERR | L | S | | ADAPTER |
____|___|______|______|______|____|___|___|__________|
| | | | | | | | | |
| ð | Y | ð2Að | 512 | | 1ð |32 | 1 | V24/V35 |
| | | | | | | | | X21 |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|____|___|______|______|______|____|___|___|__________|
ARE ALL REALTIME INTERFACE
CO-PROCESSORS RECOGNIZED
(Y/N)? N
IS THE UNRECOGNIZED CARD
THE ONE YOU WANT TO TEST
(Y/N)?
á ñ
Note: An unrecognized co-processor adapter will not have an entry
on the screen.
DO YOU WANT TO TEST AN UNRECOGNIZED CO-PROCESSOR
ADAPTER?
NO Press N; then press Enter and go to page 4-8.
YES Set the Power switch on the system unit to Off. Continue to
the next page.
Use the following steps if you have an unrecognized co-processor
adapter.
1. Set the power switch on the system unit to Off, if you have not
already done so.
2. Remove the covers to gain access to the unrecognized
co-processor adapter.
4-16
X.25 Co-Processor PCI GTO