IBM ARTIC X.25, Manual To Operations

Page: 32 / 70

1. Set the Power switch on the system unit to Off.
2. Insert your copy of the IBM Realtime Interface Co-Processor:
Advanced Diagnostics diskette into diskette drive A.
3. Set the Power switch on the system unit to On.
A screen similar to the following should appear.
à ð
IBM REALTIME INTERFACE CO-PROCESSOR
AND X.25 INTERFACE CO-PROCESSOR
ADVANCED DIAGNOSTICS
Version X.XX (C) Copyright IBM Corp 19XX
SELECT AN OPTION
ð RUN DIAGNOSTIC ROUTINES
9 EXIT TO SYSTEM DISKETTE
ENTER THE ACTION DESIRED
?
á ñ
DOES YOUR SCREEN LOOK SIMILAR TO THIS ONE?
NO If you have a blank screen, a blinking cursor, or
non-decipherable data, continue to the next page. Otherwise,
repeat the diagnostics for your personal computer system to
verify that your system unit is functioning correctly. If your
system unit is functioning correctly, your
IBM Realtime
Interface Co-Processor: Advanced Diagnostics diskette may
be defective.
YES Press 0 (RUN DIAGNOSTIC ROUTINES); then press Enter
and continue on page 4-5.
4-4
X.25 Co-Processor PCI GTO