IBM AR-B3001, Manual, Page: 13 / 41

ACROSSER TECHNOLOGY
13
Install the AR-B3001 card into your computer:
1. Set the switch and jumper as described in section 2.1.
2. Turn off the power of the computer and any peripheral
devices.
3. Unplug the power cord from the electrical outlet. Make
a note concerning location of all the cables and cords
attached to the rear of the system unit and then
disconnect.
4. Remove the system unit cover (refer to your computer
user's guide if necessary).
5. Choose an available option slot. Remove the screw
that secures the expansion slot cover to the system
unit.
6. Hold the AR-B3001 in one hand. With the other hand,
touch any metallic part of the computer's cabinet. This
will safely discharge any static electricity that has
build up in your body.
7. Align the gold edge connector with the edge socket
and install the back adapter with the adapter plate
screw. Gently press the board downward into the
socket. Re-install the adapter plate screw.
8. Replace the system unit cover.
9. Connect all cables and cords you previously removed
in step 3.