IBM Aptiva 2165, Hardware Maintenance Service

Page: 135 / 167

5-7
Power Supply Cable Connector Specifications
Refer to the following figures when checking for voltages on power supply
cable connectors.
When checking voltages, the power supply fan must be running. To power on
the power supply without using the on/off switch, use a screwdriver or other
tool to short the connector JP7 (with the switch cable disconnected from the
connector on the system board) or use a connection (jumper) to short the
black and green wires of the 20-pin connector on power supply.
11
10
20
1
Figure 5-2 System Board Power Supply Connectors