IBM 9114-275 - IntelliStation POWER 275, Installation Manual, Page: 53 / 102

Replacing the Fan Tray Assembly
To replace the fan tray assembly, do the following:
1. Confirm that the latch buttons are in the unlocked position
2. Align the guides on the front of the fan tray with the guide rails in the chassis.
3. Lower the fan tray into the system with the LED light pipe cover plate toward the LED light pipes, and
press it down into place.
4. Press the latch buttons down until you feel them lock.
5. Latch the LED light pipe plate over the LED light pipes. Be sure to align the LED light pipes with the
appropriate holes in the LED light pipe plate.
6. If your system does not contain a SCSI media device, go to the next step. If your system does contain
SCSI media device, press the media bay chassis into place until you feel the latches lock.
7. Replace the service access cover as described in “Service Access Cover Replacement” on page 28.
8. Return the system to the operating position as described in “Placing the Model 275 into the Service
and Operating Position” on page 26.
Chapter 3. Installing Options
37