IBM 9008-22L, Manual, Page: 25 / 110

6.
Hold the outside of the tool and lift the tool and system processor module from the socket. Lift the
tool upward slowly to ensure that the jaws are fully engaged with the system processor module.
Ensure that the system processor module does not disengage and fall back into the socket of the
system processor module. If the system processor module falls back into the socket of system
processor module, the pins may be damaged.
Place the system processor module at an angle on the top cover of the packaging as shown in Figure 9
on page 10. Setting the tool and system processor module at an angle on the top cover of the system
processor module packaging makes it easier to place the system processor module in the packaging.
Figure 8. Locking the system processor module into the tool
System processor modules
9