IBM 884015U, Maintenance And Troubleshooting Manual

Page: 62 / 176

Media assembly
Release latch
8. Remove the retaining wires on the DVD-ROM drive and pull the drive from the
media cage.
9. Press on the release lever on the diskette drive and remove the drive from the
media cage.
To replace the media cage , reverse the previous steps.
Removing a microprocessor
Complete the following steps to install an additional microprocessor:
1. Read the “Installation guidelines” on page 11.and the safety information
beginning on page Appendix B, “Safety information,” on page 117.
2. Turn off the server and disconnect all power cords and external cables (see
“Turning off the server” on page 7); then, remove the server cover (see
“Removing the cover” on page 16).
3. Remove the air baffle (see “Removing the air baffle” on page 17).
4. Locate the socket containing the microprocessor that you want to remove from
the system board.
52
xSeries 346 Types 8840 and 1880: Hardware Maintenance Manual and Troubleshooting Guide