IBM 8654 - Eserver xSeries 330 Hardware Maintenance Manual Download Page 63 | Manualshive

Page: 63 / 158

background image

Chapter 5. Installing options

55

Microprocessor

The server comes with one or two microprocessors installed on the system board. If
you have two, or had one and you installed a second microprocessor, the server can
operate as a symmetric multiprocessing (SMP) server. With SMP, certain operating
systems and application programs can distribute the processing load between the
microprocessors. This enhances performance for database and point-of-sale
applications, integrated manufacturing solutions, and other applications.

Notes:

1.

Before you install a new microprocessor, review the documentation that comes
with the microprocessor, so that you can determine whether you need to update
the server basic input/output system (BIOS). The latest level of BIOS for the
server is available through the World Wide Web.

2.

Obtain an SMP-capable operating system (optional). For a list of supported
operating systems, see http://www.ibm.com/pc/us/compat/ on the World
Wide Web.

3.

If the server comes with one microprocessor, it is installed in microprocessor
connector 1. This is the startup (boot) microprocessor. If you install a second
microprocessor in microprocessor connector 2, the two microprocessors will
share the system load after the system has started.

Attention:

To avoid damage and ensure proper server operation install

microprocessors that are the same type, and have the same cache size and the same
clock speed. Microprocessor internal clock frequencies and external clock frequencies
must be identical. See the ServerProven list at http://www.ibm.com/pc/compat for
a list of microprocessors for use with the server.

Clip

Heatsink

Microprocessor

Terminator card

Heatsink release

lever

Slot

Top view of

heatsink

«
...
61
62
63
64
65
...
»

Summary of Contents for 8654 - Eserver xSeries 330































































































































































Reviews:

No comments

Related manuals for 8654 - Eserver xSeries 330

Brand: IBM Pages: 128

SuperWorkstation 740A-T

Brand: Supermicro Pages: 138

Brand: TP-Link Pages: 16

SUPERSERVER 6028TP-HTFR

Brand: Supero Pages: 141

Brand: Sun Microsystems Pages: 138

Brand: Supermicro Pages: 62

Brand: D-Link Pages: 40

SUPERSERVER 6113L-8

Brand: Supero Pages: 104

SUPERSERVER 6017R-NTF

Brand: Supero Pages: 126

SuperServer 5017R-MF

Brand: Supero Pages: 106

SUPERSERVER 5015A-EHF

Brand: Supero Pages: 106

SuperServer 5013S-8

Brand: Supero Pages: 110

Supero SUPERSERVER 5015B-NT

Brand: Supero Pages: 98

Brand: Supero Pages: 122

Brand: Supero Pages: 121

SuperStorage L-Serie

Brand: Supermicro Pages: 1

Brand: Supermicro Pages: 84

SuperServer E302-9D

Brand: Supermicro Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands