IBM 8645 - Eserver xSeries 220, Hardware Maintenance Manual

Page: 116 / 168

Beep/Symptom FRU/Action
One Long and One
Short Beep
1. Video adapter (if present)
2. System Board
One Long and Two
Short Beeps
1. Video adapter (if present)
2. System Board
Two Long and Two
Short Beeps
1.
Video adapter
No beep symptoms
No Beep Symptom FRU/Action
No beep and the system
operates correctly.
1. Check speaker cables
2.
Speaker
3.
System board
No Beeps occur after
successfully completing
POST
1. Check speaker connections
2. Speaker
3. System board
No ac power
1. Check the power cord.
2. Power supply.
No beep and no video
1. See “Undetermined problems” on page 117
Diagnostic error codes
Note: In the following error codes, if XXX is 000 , 195 , or 197 do not replace a FRU.
The description for these error codes are:
000 The test passed.
195 The Esc key was pressed to abort the test.
197 This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
Error Code/Symptom FRU/Action
001-XXX-000 (Failed core
tests)
1. System Board
001-XXX-001 (Failed core
tests)
1. System Board
001-250-000 (Failed System
Board ECC)
1. System Board
001-250-001 (Failed System
Board ECC)
1. System Board
005-XXX-000 (Failed Video
test)
1. Video Adapter (if installed)
2. System Board
011-XXX-000 (Failed COM1
Serial Port test)
1. System Board
108
Hardware Maintenance Manual: xSeries 220 Type 8645