IBM 8645 - Eserver xSeries 220, Hardware Maintenance Manual, Page: 121 / 168

Error Code/Symptom FRU/Action
062 (Three consecutive boot
failures using the default
configuration.)
1. Run Configuration/Setup
2. Battery
3.
System Board
4.
Microprocessor
101, 102, 106 (System and
microprocessor error)
1. System Board
111 (Channel check error)
1. Failing adapter
2. DIMM
3. System board
114 (Adapter read-only
memory error)
1. Failing adapter
2. Run diagnostics
129 (Internal cache error)
1. Microprocessor
2. Optional microprocessor (if installed)
151 (Real time clock error)
1.
Run Diagnostics
2.
Battery
3.
System Board
161 (Real time clock battery
error)
1. Run Configuration/Setup
2. Battery
3. System Board
162 (Device Configuration
Error)
Note: Be sure to load the
default settings and any
additional desired settings;
then,
save the configura-tion.
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163 (Real-Time Clock error)
1.
Run Configuration/Setup
2. Battery
3. System Board
164 (Memory configuration
changed, see
″
Memory
Settings
″
on page 32.)
1. Run Configuration/Setup
2. DIMM
3. System Board
175 (Hardware error)
1. System Board
176, 177, 178 (Security
hardware error)
1. Run Configuration/Setup
2.
System Board
184 (Power-on password
corrupted)
1. Run Configuration/Setup
2. System Board
185 (Drive startup sequence
information corrupted)
1. Run Configuration/Setup
2. System Board
186 (Security hardware
control logic failed)
1. Run Configuration/Setup
2. System Board
187 (VPD serial number not
set.)
1. Set serial number in Setup
2. System Board
Symptom-to-FRU index
113