IBM 8271 Nways Ethernet LAN Switch, User Manual

Page: 70 / 210

4-10 C
HAPTER
4: W
ORKING
W
ITH THE
W
EB
I
NTERFACE
■
Resilient Links Setup — This page allows you to set up resilient
links for the stack.
■
Reset — This page allows you to reset the Switch units in the
stack.
■
Initialize — This page allows you to initialize the Switch units in
the stack.
For more information, see “Configuring the Stack” on page 4-26.
■
Health Pages — These pages allow you to view statistics for the
current Switch in the stack:
■
Unit Graph — This page allows you to display a range of
statistics for all the ports on the Switch.
■
Port Graph — This page allows you to display a range of
statistics for a specific port on the Switch.
For more information, see “Viewing Statistics for the Current
Switch” on page 4-36.
Navigating the Page Area
To access the first page of each category, click on the relevant
Management Icon on the side-bar; to access the remaining pages in
the category, click on the underlined hotlinks that are displayed at the
top of each page.
There are four exceptions to the navigation system. The Color Key
page, Port Summary page, Port Setup page and Console Port
Configuration page are accessed from the Switch Graphic page.
Figure 4-4 shows you how to access each of the web pages.
Making Changes in the Page Area
If you change any setting on a page in the page area, you must click
the Apply button at the bottom right of the page to make the change
to the stack. The change is only made when you click the
Apply
button.
If you make changes on a page but do not wish to apply them, click
the
Back button in your Web browser to exit the page.
F24user.bk Page 10 Wednesday, July 15, 1998 4:27 PM