IBM 7208 345, Service Manual

Page: 55 / 68

Appendix B. Fault Symptom Codes and Error Recovery
Procedure Numbers
Use Table 7 to resolve error messages that appear on the LCD of the 7208 Model
345 Tape Drive:
1. Determine the fault symptom code (FSC) in the error message (the first two
digits in the message). For example, in error message
ERR 1: AD 58 C0
, the
FSC is
AD
.
2.
Locate the FSC in Table 7 and identify the error recovery procedure (ERP)
number for that FSC.
3. Locate the ERP number in Table 8 on page 49, and identify the recommended
error recovery procedure.
Note: Abbreviations in the Description column are defined as follows:
EOD End Of Data
EOT End Of Tape
LBOP Logical Beginning Of Partition
LBOT
Logical Beginning Of Tape
LEOP
Logical End Of Partition
LEOT Logical End Of Tape
PBOP Physical Beginning Of Partition
PBOT Physical Beginning Of Tape
PEOT Physical End Of Tape
PEOP Physical End Of Partition
Note: Items in the Cause column are defined as follows:
A = Application software O = Operator
B = Bus (SCSI) S = System
D = Drive T = Tape
I = Informational message
Table 7. Fault Symptom Codes (FSC) and Error Recovery Procedure (ERP) Numbers
FSC Description ERP Number Cause
02
The tape is at an incorrect position to perform a
WRITE operation.
2
O = 50%
S = 50%
03
Tape is write protected for the requested WRITE
operation.
5
D = 5%
O = 90%
T = 5%
04
An LEOT or LEOP was encountered on the current
WRITE operation.
10 I
© Copyright IBM Corp. 2000
41